You are viewing the public-access application as a member of the public. In order to view data specific to your insurer group, please log in as an authorized user.


Log In


Back to Dashboard
Class Code Information

Phraseology

Stone Cutting or Polishing – NOC & Drivers

Description

Code 1810 applies to employers engaged in the operation of cutting or polishing stone slabs to produce building materials, headstones, table tops, and kitchen or bathroom countertops.  It also applies to slate milling, which involves cutting and smoothing the surface of the slate so it can be used for paving materials, table tops and similar uses. 

This classification also applies to cutting lettering or designs into granite cemetery monuments, whether at the shop location or in cemeteries.

This classification is also applicable to employers that principally cut marble and/or limestone as opposed to other stone, however, this classification is only applicable as long as the gross receipts from marble and/or limestone constitute less than 80% of total receipts during the policy period.

Assignment by Analogy

• Granite – cutting, carving and polishing 
• Graphite – natural – cutting
• Lamps or lighting fixtures – cut and polish      
• Millstones – grain grinding
• Onyx goods – cut and polish 

Operations to be Separately Rated

  1. Brickwork (masonry) on exterior or interior surfaces.  Refer to Code 5022 “Masonry – NOC – All Operations to Completion.”
  2. Cemetery headstone installation:
    1. Cementing stone monument on concrete foundation.  Refer to Code 5022 “Masonry – NOC – All Operations to Completion.”
    2. Pouring concrete foundations only.  Refer to Code 5221 “Concrete or Cement Work – Floors, Driveways, Yards or Sidewalks – All Operations to Completion & Drivers.”
  3. Mining:
    1. Surface mining.  Refer to Code 1624 “Quarry – NOC & Drivers.”
    2. Underground – with shafts, tunnels or drifts.  Refer to Code 1170 “Mining – NOC – With Shafts, Tunnels or Drifts & Drivers.”    
  4. Slate:
    1. Grinding by pulverizing to a powder.  Refer to Code 1741 “Flint or Spar Grinding & Drivers.”
    2. Splitting or roofing manufacturing.  Refer to Code 1624 “Quarry – NOC & Drivers.”
  5. Stone:
    1. Quarrying and cutting at quarries.  Refer to Code 1624 “Quarry – NOC & Drivers.”
    2. Cutting or polishing involving at least 80% limestone or marble.  Refer to Code 1809 “Stone Cutting or Polishing – Marble or Limestone & Drivers.”
    3. Products installation:
      1. Columns, countertops, fountains, fireplace mantels, monuments, statuary, tiles, slabs or other items installed on interior surfaces or in interior locations.  Refer to Code 5348 “Marble or Stone Setting – Inside – All Operations to Completion.”
      2. Columns, fountains, monuments, statuary, slabs, facings or tile installed on exterior surfaces or in exterior locations.  Refer to Code 5022 “Masonry – NOC – All Operations to Completion.

 

Industry Group

All Other Manufacturing